Pallmann Pall-X Power Gallon
$99.71
SKU:
83526, 81646, 83726, 83527
Availability:
Usually Ships in 24 hours
Weight: 8.00 LBS
Size: Gallon
PRODUCT DESCRIPTION
Pallmann Pall-X Power
Pallmann Pall-X Power is a 1-component clear waterborne hardwood floor finish for commercial or residential use. No hardener is needed.
Pallmann Pall-X Power is compatible with all Pallmann sealers and finishes.
Coverage and Sheens
Coverage is approximately 450-500 square feet per gallon.
Available gloss/sheen levels: Ultra Matte, Satin, Semi-Gloss, and Gloss.
Will not amber over time.
Odor and Stability
Very slight non-offensive odor.
Non-flammable: Pall-X Power should be stored in a climate controlled environment.
Pall-X Power can be used hours or days after initial opening.
Necessary Tools and Materials
Drying Process
Full cure (meaning scuff, scratch and chemical resistant) in 5 days.
After 24 hours, the floor may be walked on, but it remains susceptible to scuffing or marring until completely cured.
Do not replace area rugs until the floor has fully cured.
Do not allow foot traffic until the floor is sufficiently dried and cured.
Cleanup
Application tools should be thoroughly cleaned with water and stored in an airtight container.
Dispose of any remaining product in accordance with local, state and federal regulations.
For more information: Pallmann Pall-X Power Technical Data Sheet
